1 - Connect your card in a PCI port of your motherboard you have free (preferably not in the harbor beside his AGP video card, if you have one installed.)

2 - Turn on your PC.

3 - When your PC is started and begins to run Windows will automatically open a window for the installation of new devices, must show that they want to install the drivers who are in their installation CD in the folder
\ DVRDriver.
On the CD there are 2 different drivers; you should be sure to install the correct driver for your operating system (the card drivers for Windows 2000 are the same as for Windows XP). You should
repeat this step for each card that will integrate into their system.

4 - Check your card controllers were well installed. You can see at home \ Control Panel \ system \ hardware \ Device Manager. If you see drivers Star Star video and audio capture
capture drivers under audio, video and multimedia means that either were installed. (Remember to take one of each one of the drivers for each card installed).

5 - After installing the drivers of the card, you should install the service pack for Windows 2000 from the installation menu of DVR 404. (Only if you're running Windows 2000 or XP. If you are running Windows 98 do not need
this step).

6 - now need to install software DVR correct for the number of cards you have installed on your system: DVR for a single card 404-104, 404-208 for 2 DVR DVR cards and 404-416 for 4 cards.

This message is for the following reasons:
• The card is not properly installed in the port PCI.
• The drivers of the card are not installed correctly.
• It was not installed the service pack for Windows 2000.

Please check that have followed the installation steps correctly. If it is necessary to uninstall the software DVR 404 of your system together with the drivers, reboot your computer, and turn them to be installed following the steps of installation.

The way to uninstall the drivers in this case would be the following:
1 - restoring the system shuts down automatically. You can do at home \ Control Panel \ system \ restoration system (System Restore).
2 - clears controllers folder Windows/system32/Drivers, The names of the drivers are cg300au.inf for audio and video cg300vc.inf. (Be careful when you delete files in this folder because here are the drivers of all components of your PC and delete the wrong driver can make your system unstable).
3 - reboot your computer and remove drivers administrator devices on the control panel.

Be sure that the user with which these and entering their password are correct.. By default username and password is super vacuum.

There are 2 ways to access its system DVR 404 through network: the first is through the client software that is included in its installation CD DVR 404, which can install directly from the menu installation CD. The second is through the browser (IE Explorer 5.0 or higher), installing applications Apache Server and HTML code also located in the installation menu of your CD.

Be sure you have a static IP address, that you have assigned to your computer, you do not have a firewall that blocking access to the PC, and if you are connecting through a router or Network, which have made the addresses respective. (Please contact the person responsible for its Network).

to see the cameras by the Web:
1 - goes to the program files directory / apache group / apache / htdocs; Inside selects each of the following files (one by one):-1.htm camera, camera-2.htm, 3.htm-camera, camera - 4.htm
2 - opens with wordpad and makes a command edit / replace substituting "<? Echo gethostbyname ($ HTTP_HOST)>" replaces "<? Echo gethostbyname ($ HTTP_HOST)>" by the respective ip address.

Example replaced "<? Echo gethostbyname ($ HTTP_HOST)>" with "192.168.1.100" assuming that this is the ip of the machine. EYE include quotes in the search and replace.
That should do so in each file and then make a save .. With careful not to convert the file into a. Txt must simply make a save after replacing the information.

1 - Download the following file excel Hard Drive Calculator.xls
2 - select enable macros in order to begin implementing the calculations.