53367.167.WH3

Description:

Ajax FireProtect 2 RB (Heat/CO) (9NA) white

Against invisible threats

FireProtect 2 is a next-gen detector designed for residential fire safety. The carbon monoxide sensor alarms before the concentration level become threatening and notify about danger with a built-in powerful siren and critical alerts from Ajax apps. Thought-out design, mounting, and in-app settings make installation straightforward and quick. Everything meets the most modern fire safety standards.

FireProtect 2 features in a minute
Discover FireProtect 2

FireProtect 2 Fire Alarm System Overview

FireProtect 2 prioritizes notifying people of fire dangers with a loud 85 dB siren and distinct alarm tones. It features primary and fallback interconnectivity for enhanced safety.

• Alarm Notification: Activates all connected detectors within 20 seconds via the hub or within 1 minute if the hub is unavailable.
• Ajax Ecosystem: Offers remote setup and real-time alerts through apps, with instant notifications about any device malfunctions or battery issues.
• Advanced Features: Automates safety measures like ventilation during CO alarms, ensuring quick response.
• Wireless Technology: Employs secure, two-way radio communication with a range of up to 1,700 meters, monitored for any signal issues.
• Installation: Easy to install with no disassembly required; maintenance is automated.

FireProtect 2 supports extensive fire safety measures and seamless integration into the Ajax ecosystem for reliable home protection.

Protects from invisible danger

Carbon monoxide (CO) is colorless, odorless, and otherwise imperceptible without a carbon monoxide detector, so poisoning can occur unnoticed. Even low concentrations can be enough to have a negative health impact, especially on those with chronic illnesses, pregnant, the elderly, and young children. High-level exposure can cause permanent damage or even death in a very short period of time. FireProtect 2 warns about a dangerous CO concentration at the level of 50 ppm before even the first signs of poisoning occur. A built-in chemical sensor is responsive to low concentrations and can accurately detect the CO level straight up to 10 years.

CO alarm

50 ppm in no more than 90 minutes
100 ppm in no more than 40 minutes
300 ppm in no more than 3 minutes

Overview:

FireProtect 2 (Heat/CO) Jeweller is a wireless fire detector with a built-in siren. Designed for indoor installation. Detects temperature rise, and dangerous CO (carbon monoxide) level. The detector also can work without a hub.

It is available in two modifications: with sealed batteries (has SB in the name) that run 10 years, and with replaceable ones (has RB in the name) that run up to 7 years.

Note: A list of compatible hubs and range extenders is available here. FireProtect 2 (Heat/CO) detector is compatible only with hubs on OS Malevich 2.15.0 and later. Hub (4G) Jeweller must have OS Malevich 2.28 or later to support this detector.

The detector operates as part of the Ajax system, communicating with the hub via the Jeweller secure radio protocol. The hub communication range is up to 1,700 meters without obstacles.

Key Features:

Accurate fire detection

Heat sensor

Two A1R-class thermistors are located outside the enclosure to eliminate detection delays
An alarm is activated when the temperature rises by 10 °C (32 °F) within a minute or exceeds +64 °C (122 °F)

CO sensor

A built-in chemical sensor accurately detects CO levels for up to 10 years
A warning is provided when the CO concentration reaches the dangerous level of 50 ppm before the first signs of poisoning appear

Interconnected fire detector alarms

FireProtect 2 RB/SB detectors in the system can be interconnected and raise a fire alarm simultaneously if one of the devices detects a threat.

There are two types of interconnection, namely primary (via an Ajax hub) and fallback (detector-to-detector), which work in parallel. In case of danger, an initiating detector sends a fire alarm to the hub, which, in turn, activates the primary interconnection. This activates the built-in sirens of all fire detectors in the system in 20 seconds.

Meanwhile, the initiating detector activates the fallback interconnection and sends the alarm to other fire detectors. Even in the worst-case scenario, all fire detectors in the system notify of the danger within a minute.

System supervision

Regular polling of each system device to display current states in apps
Automatic detector self-diagnosis with state reporting to the hub
Up to 1,700 m (5,550 ft) of wireless communication, or twice as much with a range extender
Instant maintenance notifications

Additional features

Automation scenarios activation
Visual alarm verification using MotionCam detectors or cameras
Indoor/outdoor siren activation
Sending alarms to CMS
Built-in 85 dB siren
LED indication of detector states

Quick installation and setup

SmartBracket panel to mount the device without disassembling the enclosure
Pairing with a hub via QR code, with remote control and configuration in the app

Specifications

FireProtect 2 RB (Heat/CO) Jeweller

Wireless combined heat and CO detector with replaceable batteries

Check

Communication

Jeweller communication technology

Proprietary wireless technology for transmission of alarms and events.

Features:

Two-way communication.
Protection against device spoofing.
Block encryption featuring a floating key.
Instant notifications.
Remote configuration via the Ajax apps.

Learn more

Radio frequency bands

866.0 – 866.5 MHz
868.0 – 868.6 MHz
868.7 – 869.2 MHz
905.0 – 926.5 MHz
915.85 – 926.5 MHz
921.0 – 922.0 MHz

Depends on the region of sale.

Maximum effective radiated power (ERP)

up to 20 mW

Automatic power control to reduce power consumption and radio interference.

Radio signal modulation

GFSK

Radio communication range

up to 5,500 ft

Between the detector and a hub (or radio signal range extender) in an open space.

Calculate radio communication range at the facility

Encryption of radio communication

All the data stored and transmitted are protected by block encryption with a floating key.

Radio frequency hopping

To prevent radio interference and jamming.

Learn more

Sensitive elements

heat sensor

CO (carbon monoxide) sensor

Dangerous temperature detection

Sensitive element

according to the requirements for Class A1R heat detectors

Requirements of EN 54-5 and BS 5446-2 standards.

High temperature alarm

at temperatures above 147°F

Temperature spike alarm

when the temperature rises more than 50°F in 1 minute or less

Carbon monoxide (CO) detection

Sensitive element

chemical CO sensor

Alarm if accumulated dose of CO is exceeded

more than 50 ppm (0.005%) — no more than in 90 minutes
more than 100 ppm (0.01%) — no more than in 40 minutes
more than 300 ppm (0.03%) — no more than in 3 minutes

CO concentration of 400 ppm (0.04%) within 3 hours can be life-threatening. The detector stops notifying about the dangerous level of carbon monoxide when the concentration drops to 50 ppm (0.005%) within one minute.

Sensor life

10 years

After 10 years of operation, the detector must be replaced with a new one.

Additional features

In-built siren

volume 85 dB at a distance of 9 ft

Sound notification of alarms. Active until the reason for triggering is eliminated or until the user disables notification.

Interconnected fire detectors alarms

via primary interconnection

If one of the fire detectors in the system detects a threat, it sends an alarm to the hub. Within 20 seconds, the hub initiates an interconnected alarm and sends data to Ajax apps.

LED indication

green is a power indication

A LED indicator on the device enclosure lights up once every 56 seconds. The indication meets the requirements of EN 50291.

yellow is an indication of malfunctions

A LED indicator on the device enclosure lights up when malfunctions are detected. For example, if the battery is low.

red is an indication of fire alarms

A LED indicator on the device enclosure lights up when the detector registers a fire alarm.

Button on the front panel of the detector

In normal mode, runs the detector test when pressed. In the event of an alarm or malfunction, the pressing turns off the detector sound notification.

Recommendations

The device is designed only for indoor installation. SmartBracket mounting panel allows adjusting the position of the detector after installation.

Anti-sabotage protection

Tampering alarm

Alerts of attempts to detach the detector from the surface or remove the mounting panel.

Learn more

Protection against spoofing

device authentication

Detection of communication failure

within 15 minutes

The time to detect communication loss depends on the settings for the number of undelivered data packages (specified in the Jeweller or Jeweller/Fibra settings). The polling interval is fixed at 300 seconds.

Learn more