We understand how difficult it is to decide on a wired alarm upgrade. It is a common situation when your system is still capable of protecting your property but is clearly outdated. Renovating with Ajax doesn't force you to leave behind the current equipment. It gives you a chance to build modern complex security based on existing wired equipment.
Security via smartphone
With MultiTransmitter, system users get security control via app, data-rich notifications, and automation scenarios. An installer can set up the system or device in the PRO-app, both while on-site and remotely.
More Ajax features
Perimeter IR detectors, household gas sensors, thermostats, float sensors, keypads, and other devices are ready to expand the Ajax areas of use. Connect them to a hub via MultiTransmitter and manage the combined security system in the Ajax app.
Multitasking in a single body
Use automation scenarios for the security system to respond to threats immediately, enabling features like scheduled arming, motion-activated lights, and fire ignition control. MultiTransmitter enhances old alarms by providing detailed notifications on device names, alarm types, and locations via push notifications, SMS, and monitoring stations. It uses encrypted Jeweller technology for reliable communication and can cover 35 km² with extenders. It also alerts users to device interruptions and has backup power for up to 4 days and detection tamper for security.
Overview:
MultiTransmitter Jewelleris an integration module for connecting third-party wired detectors and devices to an Ajax system. It has 18 wired zones for connecting NC, NO, EOL, 2EOL, and 3EOL devices.
MultiTransmitter is equipped with two tampers that protect it against dismantling. The device is powered from the 100–240 V~ mains, and can also run on a 12 V⎓ backup battery. Can supply 10.5–15 V⎓ for connected detectors and devices.
Nota:
2EOL and 3EOL connection types are only available for MultiTransmitter Jeweller with the firmware version 2.13.0 or later. The integration module should be added to a compatible hub running on OS Malevich 2.13 or later. If Hub (4G) Jeweller is used, the control panel should be updated to OS Malevich 2.28 or later.
MultiTransmitter is incompatible with ocBridge Plus, uartBridge and third-party security control panels.
We are stopping production and delivery of the previous version of MultiTransmitter without 2EOL and 3EOL support. Technical support and warranty services for these devices remain unchanged. So that users and partners can distinguish the versions from each other, the new devices come in different packaging — with a “3EOL” label.
Due to hardware differences, a firmware upgrade for old versions of MultiTransmitter is not provided.
MultiTransmitter works as a part of an Ajax system and communicates with the hub via secureJewellerradio protocol. The communication range with the hub is up to 2,000 meters in an open space.
Key Features:
18 inputs for third-party wired devices
Up to 400 m of cable length between devices and MultiTransmitter
Numerous event types for each connected device
The second life of an old wired alarm
MultiTransmitter opens new markets and allows building modern complex security based on existing wired equipment installed at a facility.
Ajax1s security system users get security control via app, data-rich notifications, and scenarios with this integration module and old third-party wired devices.
An installer can set up the system or device in the PRO app, both while on-site and remotely.
Maximun compatibility with the new firmware
MultiTransmitter a lows connecting a wide range of wired sensors. The integration module with firmware version 2.13.0 and higher supports NC, NO, EOL, 2EOL, and 3EOL connection types. EOL resistance detects automatically in the PRO app.
The device supports EOL1s with resistance from 1 kO to 15 kO each with tota resistance of 30 kO. To increase the protection against sabotage, EOL1s with different resistance can be used in one sensor. MultiTransmitter has three independent 12 V--- power outputs for third-party wired sensors: one for fire sensors and two for the rest devices. Recommended EOL ratio: R1 ==R, R2==2·R, R3==3·R.
MultiTransmitter has four 12 V--- power outputs for third-party wired sensors: one for fire sensors and three for other devices.
two-way encrypted comunication
Jeweller is a two-way wireless data transfer protocol that provides fast and reliable communication between hub and devices. The protocol delivers instant data-rich alarms: security companies and users know which device was triggered, when and where it happened.
Jeweller features encryption and authentication to prevent forgery and polling to display devices' status in real time. Supporting up to 2,000 m of wireless connectivity, Jeweller is ready to protect facilities and deliver the best user experience for both end users and installers.
Up to 2,000 m of two-way encrypted wireless communication
Alarm delivery in 0.15 s
Specifications
MultiTransmitter Jeweller
Wireless module to integrate up to 18 third-party devices into the Ajax system
Multiple devices can be connected to one zone. The number of connected devices depends on their power consumption.
Type of connection
NC, NO, EOL
MultiTransmitter Jeweller with a firmware version lower than 2.13.
NC, NO, EOL, 2EOL, 3EOL
2EOL and 3EOL connection types are only available for MultiTransmitter Jeweller with the firmware version 2.13.0 or later. The integration module should be added to acompatible hubrunning on OS Malevich 2.13 or later. IfHub (4G) Jewelleris used, the control panel should be updated to OS Malevich 2.28 or later.
EOL resistance
from 1 kΩ to 7.5 kΩ with 100 Ω increment
MultiTransmitter Jeweller with a firmware version lower than 2.13. EOL resistance is measured automatically in the Ajax PRO apps.
from 1 kΩ to 15 kΩ for each resistor, up to 30 kΩ of total resistance
MultiTransmitter Jeweller with a firmware version 2.13 and higher. Resistance is measured automatically for each EOL resistor in the Ajax PRO apps.
Cable length
up to1,300 ft
When using a signal cable with a0.00034 sq. incopper-clad aluminium conductor.
Operation mode
pulse, bistable
Adjusted by a PRO or user with admin rights in the Ajax app.
Event types
15 event types of wired devices
Tamper alarm
Intrusion
Fire
Auxiliary alarm
Panic button
Gas alarm
Malfunction
Leakage
Glass break
High temperature
Low temperature
Masking
Duress code (opening)
Vibration (seismic sensor)
Custom
Adjusted by a PRO or a user with admin rights in the Ajax app.
Recommendations
The device is powered from the 100–240 V~ mains and designed for indoor use only.
Sabotage protection
Tamper alarm
Two tampers to detect the MultiTransmitter Jeweller casing opening and alert about detachment from the wall.
Between a hub or range extender and MultiTransmitter Jeweller. The detection time depends on theJewellerorJeweller/Fibrasettings.
Instant detection of wired connection loss, short circuits, and malfunctions
when using EOL/2EOL/3EOL connection type
Depends on the connection type.
Power supply
MultiTransmitter Jeweller power supply
100–240 V~, 50/60 Hz
Type
type A
Power supply is used inside the supervised premises.
Device’s operating voltage range
100–240 V~, 50/60 Hz
Quiescent device’s current consumption at nominal voltage
14.6 mA
Maximum device’s current consumption at nominal voltage
69.6 mA
MultiTransmitter Jeweller backup power supply
12 V⎓, up to 7 Ah capacity with a full charge cycle of up to 30 hours
MultiTransmitter Jeweller average consumption from the backup battery after the main power supply loss is up to 33 mA (without detectors). When using a 7 Ah battery, the minimum operating time at a maximum load of 1 А will be 7 hours. For autonomous work for 12 or 24 hours, the maximum load should be no more than 0.55 A and 0.28 A, respectively. The backup battery is not included in the set.
Low battery voltage
11.4 V⎓
Low battery recovery voltage
12.9 V⎓
End-of-life battery voltage
11.1 V⎓
Maximum output peak-to-peak ripple battery voltage
50 mV⎓
Minimum backup battery energy level in the charged state
100%
Connected devices power supply
10.5–15 V⎓, up to 1 A of total maximum current consumption
Two power lines powered by MultiTransmitter Jeweller for other devices. One power line for fire detectors.
Casing
Dimensions
7.55″ × 9.37″ × 3.94″
Weight of the white device
30.83 oz
Weight of the black device
28.29 oz
Operating temperature range
from 14 °F to 104 °F
Temperature range from 32 °F (0 °C) to 120 °F (+49 °C) is certified according to UL/ULC standards.
Operating humidity
up to 75%
Humidity of up to 93% is certified according to UL/ULC standards.
Protection class
IP40, IK06
The new casing version of MultiTransmitter Jeweller has light guides for the integration module LED indication, while the previous version has the LED indicator on the board.
Colors
Black
White
Complete set
MultiTransmitter Jeweller board
Casing
Power cable
Screw terminal block Adapter (only for INCERT compliance)
Datasheet
