CPE210

Description:

2.4GHz 300Mbps 9dBi Outdoor CPE

TP-LINK CPE210: Key Features

The TP-LINK CPE210 is a versatile and powerful device designed for outdoor long-range wireless transmission. Below are some of its key features that make it an ideal choice for various networking applications.

Integrated 9dBi 2x2 Dual Polarized MIMO Directional Antenna

The built-in 9dBi 2x2 dual polarized MIMO directional antenna enhances signal strength and coverage. This feature ensures a stable and strong connection, making it suitable for outdoor environments where signal interference might occur.

Adjustable Transmit Power

The CPE210 offers adjustable transmit power ranging from 0 to 25dBm/500mW. This feature allows users to fine-tune the power settings according to specific network requirements and environmental conditions, optimizing performance and energy efficiency.

Long-Range Wireless Transmission

With system-level optimizations, the CPE210 is capable of supporting long-range wireless transmissions of more than 5 kilometers. This makes it an excellent choice for bridging networks over large distances without sacrificing signal quality.

TP-LINK Pharos MAXtream TDMA Technology

The inclusion of TP-LINK Pharos MAXtream TDMA (Time Division Multiple Access) technology significantly improves the device's performance in terms of throughput, capacity, and latency. This technology is particularly beneficial for Point-to-Multipoint applications, ensuring efficient data transmission and minimized interference.

Centralized Management System: Pharos Control

Managing multiple devices is streamlined with the centralized management system, Pharos Control. This system allows for easy configuration, monitoring, and maintenance of the network, enhancing overall network management efficiency.

Versatile Operation Modes

The CPE210 supports multiple operation modes, including AP (Access Point), Client, AP Router, and AP Router Client (WISP). These modes provide flexibility in network deployment and are adaptable to various networking needs and setups.

Passive PoE Adapter

The Passive PoE (Power over Ethernet) Adapter supports deployments up to 60 meters (200 feet) and enables remote rebooting of the device. This feature facilitates convenient installation and maintenance, especially in hard-to-reach areas.

In summary, the TP-LINK CPE210 is a robust and adaptable device equipped with features that support long-range, high-performance wireless networking. Whether used in rural, suburban, or urban environments, its capabilities ensure reliable connectivity and efficient network management.

Specifications
HARDWARE FEATURES
Processor	Qualcomm Atheros 560MHz CPU, MIPS 74Kc
Memory	64MB DDR2 RAM, 8MB Flash
Interface	1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 Grounding Terminal 1 Reset Button
Power Supply	Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC
Power Consumption	5 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.
Dimensions ( W x D x H )	224 x 79 x 60 mm
Antenna Type	Built-in 9dBi 2x2 Dual-polarized Directional Antenna Beam Width: 65° (H-Plane) / 40° (E-Plane) Note: For more details, please refer to datasheet
Protection	15KV ESD Protection 6KV Lightning Protection
Enclosure	Outdoor ASA stabilized plastic material IPX5 waterproof Certification

WIRELESS FEATURES
Wireless Standards	IEEE 802.11b/g/n (with Pharos MAXtream disabled)
Proprietary Protocol	TDMA Mode (with Pharos MAXtream enabled)
Wireless Speeds	Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic)
Frequency	2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.
Transmission Power	25dBm/316mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.

SOFTWARE FEATURES
Wireless Configurations	Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
Management	Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server
System Tools	Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute
System-level Optimizations	Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog

POE ADAPTER FEATURES
Dimensions(W x D x H)	85.8×43.9×29.7 mm
Interfaces	1 AC Jack with Earth Ground 1 10/100Mbps Shielded Ethernet Port (Power + Data) 1 10/100Mbps Shielded Ethernet Port (Data)
Button	Remote Reset Button
Power Status LEDs	Green
Input	100-240VAC, 50/60Hz
Output	• V2.0: 24VDC, 0.6A Max • V3.0: 24VDC, 0.5A Max • V3.20: 24VDC, 0.25A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
Efficiency	>80%
Certifications	CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark

OTHERS
Certification	CE, FCC, RoHS, IPX5
Package Contents	Outdoor Wireless CPE 24V 0.6A Passive PoE Adapter Pole Mounting Straps AC Power Cord Installation Guide
System Requirements	Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
Environment	Operating Temperature: -40℃~70℃ (-40℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing

Datasheet