DS-K5604A-3XF/V Face Recognition Terminal

The DS-K5604A-3XF/V Face Recognition terminal is an advanced and high-performance product manufactured by Hikvision and distributed by Nodac Technology in Miami, Florida. This device is designed to accurately and quickly recognize faces and provide access control for various environments.

- Plug & play: Supports rapid deployment. Free of wiring, installation, or configuration

- Supports Vanadium Oxide uncooled sensor to measure target's temperature

- Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C (without black body calibration)

- Recognition distance: 0.3 to 2 m

- Fast temperature measurement mode: Detects face and takes temperature without identity authentication

- Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc

- Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid.

- Displays temperature measurement results on the authentication page

- Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed

- Triggers voice prompt when detecting abnormal temperature

- Configurable door status (open/close) when detecting abnormal temperature

- Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software

- Integrated design with stand bracket

- Communicates with the third-party turnstile via IO output or Wiegand

- Adjustable supplement light brightness

- High performance processor with deep learning algorithm

- 50,000 face capacity and 100,000 event capacity

- Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%

- Transmits and saves the comparison results and the captured pictures to the client software or others

- NTP, manually time synchronization, and auto synchronization

- Watchdog design for protecting the device and ensuring device running properly

- Audio prompt for authentication result

- In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.

- Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.