- Supports Vanadium Oxide uncooled sensor to measure target's temperature
- Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
- Recognition distance: 0.3 to 1.8 m
- Fast temperature measurement mode: Detects face and takes temperature without identity authentication
- Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
- Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
- Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
- Displays temperature measurement results on the authentication page
- Triggers voice prompt when detecting abnormal temperature
- Configurable door status (open/close) when detecting abnormal temperature
- Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
- Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
- 6000 face capacity, 6000 card capacity, and 100,000 event capacity
- Suggested height for face recognition: between 1.4 m and 1.9 m
- Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
- Watchdog design and tamper function
- Audio prompt for authentication result
- NTP, manually time synchronization, and auto synchronization Connects to external access controller or Wiegand card reader via Wiegand protocol
- Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
- Imports and export data to the device from the client software
- Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
- In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.
Temperature measurement
Temperature range 30 °C to 45 °C (86 °F to 113 °F) Sensor Vanadium Oxide uncooled sensor Resolution 120 × 160 Frame rate 25 fps Measurement accuracy 0.1 °C Measurement deviation ± 0.5 °C, without black body calibration Measuring distance 0.3 to 1.8 m
Screen
Size 7-inch Type Touch screen
Camera
Pixel 2 MP Lens Dual-lens
Network
Wired network Support, 10/100/1000 Mbps self-adaptive
Interface
Network interface 1 RS-485 1 Wiegand 1 Lock output 1 Exit button 1 Door contact input 1 IO input 2 IO output 1 TAMPER 1
Capacity
Card capacity 6000 Face capacity 6000 Event capacity 100,000
Authentication
Card type Mifare 1 card Card reading distance 0 to 5 cm Card reading duration ＜ 1 s Face recognition duration ＜ 0.2 s per person Face recognition distance 0.3 to 1.8 m
Function
Face anti-spoofing Support Live view Support Audio prompt Support
Others
Power supply 12 VDC/2 A Working temperature 0 °C to 50 °C (32 °F to 122 °F) For temperature measurement: 10 °C to 35 °C (50 °F to 95 °F) Working humidity 10 to 90% (No condensing) Application environment Indoor and windless environment use only
