The RE-2554 fire alarm control panel is a microprocessor-based UL listed 4 Zone conventional fire alarm control panel that has a 16 X 2 LCD character display, 4 zones detection circuit, 3 common potential free contacts, and 2 common NAC sounder outputs. It also has an inbuilt Rs-485 for repeater connectivity and can be wall or ceiling mounted. The system has a switch mode power supply (SMPS) and battery polarity and deep discharge protection.
This fire alarm control panel is designed with a unique protocol to be used for small and medium establishments, schools, hospitals, hotels, banks, commercial buildings, and small-scale industries. The system is user-friendly and includes all standards to ensure ease of use and high reliability.
The RE-2554 Fire Alarm Control Panel is a microprocessor-based, UL listed 4 Zone conventional fire alarm control panel that is distributed by Nodac Technology in Miami, Florida. It has a 16 X 2 LCD character display, 4 zones detection circuit, 3 common potential free contacts, and 2 common NAC sounder outputs.
The panel has inbuilt Rs-485 for repeater connectivity and can be wall or ceiling mounted. It has a switched mode power supply (SMPS) and battery polarity and deep discharge protection.This fire alarm control panel is designed with a unique protocol to be used for small and medium establishments, schools, hospitals, hotels, banks, commercial buildings, and small scale industries.
The system has a user-friendly interface that includes all standards to ensure ease of use and high reliability. It is ruggedly constructed with CRCA sheet and powder-coated finish, making it durable and long-lasting.The RE-2554 Fire Alarm Control Panel has surge protection for all input and outputs, programmable AC loss delay/trouble remainder/alarm verification, and a standby (battery) backup 24v DC power supply with a built-in charger.
The system has error-free fire/fault status in unambiguous colored LED indication, system ON indication, and main and standby status audible and visual indication.This fire alarm control panel has form C relays for fire, fault, and supervisory, resettable/steady 24V D.C. output, RS 485 communication facility (optional), lamp test facility, and walk test facility. It has zone isolation facility with loop voltage cut off, earth fault annunciation facility at 0 ohms, AC low voltage cutoff, and programmable alarm verification and trouble reminder.
In summary, the RE-2554 Fire Alarm Control Panel is a reliable and efficient solution for fire detection and alarm systems. It is easy to install and use, and it provides a secure and stable mounting solution for cameras. It is compatible with a wide range of Hikvision dome cameras and is distributed by Nodac Technology, a trusted brand in Miami, Florida.
Primary Power 120 – 220VAC ± 10%, 50 Hz, 2.5Amps.
Standby Power |
Initiating Device Circuits All zones are Class B Style B/C operation (Programmable). Normal Operating Voltage: 14 – 21 VDC. Alarm Current: 15 – 30mA. Short Circuit Current: 45mA Maximum. Loop resistance: 100 ohms Maximum. End-Of-Line Resistor: 3K9, 1/2watt Standby Current: 7mA (2mA for Detectors) |
Operating Condition Operating Temperature 0 – 49° C/32-120° F. Relative Humidity 93 ± 2% RH (non- condensing) at 32 ±2° C/90 ±3° F. |
|
Charging Circuit Charging Voltage 28.2V, ±0.5V Charging Current 800mA (Max.). |
Notification Appliance Circuits Class B Style – Y wiring Operating Nominal Voltage: 24VDC Special Application Current for all NACs: 1.2Amps (0.6A per circuit) Line Drop: 1.8V End-Of-Line Resistor: 3K9, 1/2watt |
D.C. Output Supervised 24VDC regulated, 300mA Max. |
|
Common Relays Type : Form C No of Relays : 3 Relay Contact Rating : 2Amps @ 30 VDC, 0.5Amps @ 125VAC. Power Factor : 1.0 |
Dimensions | : | (440W X 340H X 120D) |
Color | : | Red / White |
Construction | : | 18 Gauge (1.22mm) CRCA sheet with powder-coated Finish |
IP Rating | : | IP50 |
Cable Entry | : | 11xø19mm Knockout in top of the cabinet 10xø22.25mm Knockout in top of the cabinet |
Model | Description |
---|---|
RE- 2554-W | 4 Zones |
RE- 2554-R | 4 Zones |
Note:
W-White Color,
R- Red Color
Models | Description |
---|---|
RE-316S-2L | Photoelectric Smoke detector with base. |
RE-316H-2L | Heat detector with base. |
RE-316SH-2L | Photoelectric & Heat detector with base |
RE-314 | Common base for above |
RE-716MR | MCP Red |
RE-716MG | MCP Green |
RE-716MY | MCP Yellow |
RE-24CS | Mini Horn |
RE-24SS | Sounder cum Strobe |
RE-Monitor | 24VDC Output for Monitor Module |
RE-3K9 | End Of Line Resistor |
The Ravel RE-2554 Fire Alarm Control Panel offers six key advantages for buyers. First, it features a Switched Mode Power Supply for energy efficiency. Second, its modular construction simplifies maintenance. Third, it includes Auto Resettable Fuses for added safety. Fourth, Surge Protection safeguards all inputs and outputs. Fifth, it offers programmable settings for AC loss delay, trouble reminder, and alarm verification. Lastly, it has Battery Polarity Reversible Protection.
The Ravel RE-2554 Fire Alarm Control Panel boasts a user-friendly 16x2 Dot Matrix LCD Display, making it easy to operate and monitor. This feature, along with the system's unique protocol, ensures a high level of usability and reliability, catering to a variety of establishments, from schools and hospitals to commercial buildings.
Featuring a Switched Mode Power Supply (SMPS) and Battery Polarity Reversible Protection, the RE-2554 ensures efficient power management and uninterrupted operation. This innovative power system, coupled with Surge Protection for all inputs and outputs, guarantees a robust and dependable fire alarm solution for your small and medium-sized establishments.